Chestnut Products Cut’n’Polish 225ml ONEID_OVER_18 It has a tough oak

It has a tough oak handle with a nonslip rubber grip and the stainless steel head is rust-resistant

If you're using conventional 12

To fit onto a lathe with 3/4" x 16tpi headstock thread

Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting

Chestnut Products Cut’n’Polish 225ml ONEID_OVER_18 It has a tough oakCutnPolish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay wet slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of CutnPolish with the lathe