OTC 8071 Step Plate Adapter, 3" x 2-1/2" Supplies & Equipment>Paint Prep The segments are positioned behind

The segments are positioned behind the bearing on the inner ring and thus ensure uniform force transmission on the complete bearing

Position the U-shaped belt cradle against the bottom of the belt at a 90 degree angle and locate the large O-ring to a reference point

If you are still looking for the Cummins engine repair tools you're searching for in our catalog

Superseded from GE-46143

OTC 8071 Step Plate Adapter, 3" x 2-1/2" Supplies & Equipment>Paint Prep The segments are positioned behindOTC 8071 Step Plate Adapter, 3" x 2 1 2" Necessary for pulling and installing bearings, gears, or other parts found on hollow shafts or housings. They may be used with Grip O Matic pullers and Push Pullers, as well as shop presses. All adapters are available separately and in OTC 8074, 8075, and 8076 Step Plate Adapter Sets. Please refer to the chart to determine which step plate adapter(s) best suits your needs. Manufacturer: SPX Bosch (OTC Rotunda